Online Tone Generator

Generate a pure tone at any frequency from 1 Hz to 22,000 Hz. Choose sine, square, triangle or sawtooth, play it in one or both ears, sweep across a range to test speakers, and download the exact tone as a WAV or MP3 file.

  • Files stay on your device
  • Free, no sign-up
  • Instant
Hz

Frequency sweep
 

Start quiet. High and very low tones can be uncomfortable or damage hearing, especially with headphones.

Quick guide · 3 steps

How to use the Tone Generator

When to use the Tone Generator

Testing speakers and headphones

Check left and right channels, find rattles and see how low a subwoofer really goes.

Tuning and ear training

Play a reference pitch such as A 440 to tune by ear or practise singing intervals.

Science and school experiments

Demonstrate frequency, octaves, beats and resonance with exact, repeatable tones.

Audio and electronics work

Generate a 1 kHz reference or a sweep to check equipment, cables and room acoustics.

Features and benefits

  • 1 Hz to 22 kHz with 0.01 Hz precision and the nearest musical note shown
  • Sine, square, triangle and sawtooth waveforms
  • Left-only, right-only or both-ear playback for speaker and headphone checks
  • Frequency sweeps and WAV/MP3 download from 5 seconds to 1 minute

Example

Input
Frequency 1000 Hz · sine · left ear only · 10 seconds
Output
tone-1000hz-sine-10s.wav – a clean 1 kHz test tone in the left channel

How the Tone Generator works

The live tone uses the browser’s built-in oscillator, which produces mathematically exact waveforms. Volume changes and frequency changes are smoothed over a few milliseconds so they never click. The sweep uses an exponential curve, which spends equal time in every octave – the way we hear pitch – rather than racing through the low end. Downloads are calculated one sample at a time at 44.1 kHz, so a 440 Hz file contains exactly 440 cycles per second, with ten-millisecond fades at the start and end.

A real-life example

Hamza installed a new subwoofer in his car and wanted to check its range. He set a sweep from 20 Hz to 150 Hz over 30 seconds and noted that the bass became clearly audible at around 32 Hz and that a door panel rattled near 55 Hz. He then played a steady 55 Hz tone to find and fix the loose panel.

Good to know

Frequency is how many times a sound wave repeats each second, measured in hertz. Low numbers sound deep: 40 to 100 Hz is the territory of bass guitar and kick drums. The middle A on a piano is 440 Hz, and doubling any frequency raises the pitch by exactly one octave, which is what the ×2 and ÷2 buttons do. Most adults hear up to somewhere between 14 and 18 kHz, and the upper limit falls with age.

The waveform changes the colour of the tone. A sine wave is a single pure frequency with no harmonics – ideal for testing and hearing checks. Triangle waves add a few soft harmonics, square waves add strong odd harmonics for a hollow, buzzy sound, and sawtooth waves contain every harmonic for the bright edge used in synthesisers. Comparing them at the same frequency is a great way to understand timbre.

Tones are generated mathematically on your device. The live tone uses the browser’s audio oscillator, and the download is calculated sample by sample so the file contains exactly the frequency you chose with smooth fades at each end to avoid clicks. Please protect your ears: begin at low volume, take care with headphones, and avoid listening to very high or very loud tones for long.

Tips for the best results

  1. Always start at low volume and raise it slowly.
  2. Use sine waves for testing; other waveforms add harmonics that can confuse results.
  3. Phone and laptop speakers cannot reproduce deep bass – use headphones or proper speakers below 100 Hz.
  4. Two tones a few hertz apart create a pulsing “beat”, which is how musicians hear when they are out of tune.
  5. Use WAV downloads for measurement; MP3 compression can alter very high frequencies.

Common mistakes to avoid

Playing very high tones loudly through headphones

Keep high-frequency tests short and quiet; they can cause discomfort and damage.

Assuming silence means your hearing stops there

Many speakers simply cannot play very high or very low frequencies.

Using MP3 for precise tests above 16 kHz

MP3 encoders often remove those frequencies – download WAV instead.

Tone Generator – frequently asked questions

How can I test my speakers or subwoofer?

Use a slow sweep from 20 Hz to 200 Hz to find where the bass fades out, or choose Left only and Right only to check that each speaker is wired correctly.

Can I use this as a hearing test?

It can show roughly where your high-frequency hearing stops, but it is not a medical test. Speakers and headphones vary a lot. See an audiologist if you are worried about your hearing.

Why does a square wave sound louder?

Square and sawtooth waves carry extra harmonics and more energy at the same volume setting. They are reduced slightly here, but still sound brighter and louder than a sine.

What is 528 Hz or 432 Hz?

They are frequencies some people use for relaxation or alternative tuning. There is no scientific evidence of special effects, but you are welcome to listen to any tone you like.

Can I play two tones at once?

Open the tool in two browser tabs and play a different frequency in each to hear beats and intervals.

What frequency is middle C?

Middle C (C4) is about 261.63 Hz when A4 is tuned to 440 Hz.